ResMed AirTouch N30i Nasal Cradle Mask

The AirTouch N30i is designed with soft, breathable, and moisture-wicking materials to minimise skin irritation. However, to prevent discomfort:
Ensure the mask is properly fitted. A tight mask can cause pressure points, while a loose mask may lead to air leaks and friction.
Use the correct cushion size, as an ill-fitting cushion can increase irritation.
Clean the mask daily with mild soap and water to remove oil and dirt buildup.
Refer to the mask user guide for detailed cleaning and fitting instructions.

The lifespan of your CPAP nasal cushion depends on usage frequency, maintenance, and storage conditions. Signs that it may need replacing include:
Loss of seal or increased air leaks.
Visible wear, tear, or discolouration.
Reduced comfort or increased skin irritation.
Check your cushion regularly and replace it as needed. Refer to the “Cleaning Your Mask at Home” section in the mask user guide for maintenance tips.

To ensure a secure and comfortable fit, follow these steps:
Position the mask: Place the cushion over your nose, ensuring it sits comfortably without pressing too hard.
Adjust the headgear: Attach the straps around your head, ensuring they are snug but not too tight.
Connect the tubing: Attach the CPAP tubing to the mask, ensuring there are no kinks or obstructions.
Turn on the CPAP machine: Check for air leaks and make necessary adjustments to the cushion or headgear.
Always refer to the mask user guide for detailed instructions.

Regular cleaning helps maintain comfort and hygiene. Follow these steps:
Disassemble the mask: Separate the cushion, frame, and headgear.
Wash the components: Use mild soap and warm water to gently clean the cushion and frame. Avoid harsh chemicals that could damage the materials.
Rinse thoroughly: Remove all soap residue to prevent skin irritation.
Air dry: Let the components dry out of direct sunlight to prevent material degradation.
Refer to the mask user guide for specific cleaning instructions.

To assemble the AirTouch N30i:
Reconnect the cushion: Attach the cushion to the frame until it clicks securely.
Attach the headgear: Slide the straps into place, securing them according to the mask’s design.
Connect the tubing: Attach the CPAP tubing to the mask’s elbow or frame, depending on the model.
Always consult the mask user guide for detailed assembly instructions.